150 IB > > |
|
 |
Features:
One-step forming keeps bottle clean. Suitable for cosmetics, pharmacy, etc.
- Automatic system control.
- Values can be saved when mold exchange.
- Slow mode makes mold exchange more safety and convenience.
- PID of heaters are control by computer, It can control temperature precisely even when screw are high speed rotating.
- Molds are not distortion, moving quickly and smoothly without vibration.
- Producing quickly, stable and low noise.
- Compare with others can save 15% energy.
Specifications:
| ITEM / MODEL |
150 IB |
| Screw diameter |
mm |
70 |
| Injection volume |
cm3/shot |
961 |
| Injection stroke |
mm |
250 |
| Plasticizing rate |
cm3/s |
65 |
| Screw L/D ratio |
|
20 |
| Preform clamp |
kN |
1300 |
| Blow mold clamp |
kN |
250 |
| Max. Die. set |
mm |
1000x450 |
| Trigger bar |
mm |
920 |
| Dry cycle time |
sec |
4.5 |
| Oil tank capacity |
L |
400 |
| Power supply |
kW |
60 |
| L x W x H |
m |
5.5x2.6x2.7 |
| Total Weight |
ton |
10 |
Mold:
SUMA provide professional mold design, manufacture and testing, the quality and production are guaranteed.
- The material of mold is made of stainless steel to prevent rust pollution and corrosion.
- The properties of mold are high hardness (52°HRC), high strength, high wear resistance and tough to extend the durability of mold.
- Each cavity of mold is individual means easier to repair or dismantle.
- Suitable for producing the bottle neck diameter from 6mm to 70mm.
- Mold exchange can be finish within 3 hours
Control Terminal:
The humanized operation control panel which combines the touch screen and operation bottoms can directly entering the control values
- The touch screen with graphical interface is easy-to-learn for user.
- Apply with individual buttons with easy for maintenance and modify.
- Powerful memory function can save hundreds of memory of control values
- Automatic failure detect and showing the abnormal message on touch screen
- Holding pressure free programmable in 6 steps. And 10 steps for each of injection and plasticizing.
- Mold protection with stroke dependent pressure and speed free programmable.
- Real values of time, speed and pressure of injection and plasticizing can be monitor and control by terminal.
- All parameters in real values
- Digital set points for all strokes, speeds, pressures and temperatures
- Self-failure-detect and alarm system control.
|
|
|
|
| |
|
|
